Growth Kinetics and Characterization of Chromia Scales Formed on Ni–30Cr Alloy in Impure Argon at 700 °C

Oxidation of Metals - The oxidation of a Ni–30Cr alloy at 700 °C in impure argon was studied in order to provide new elements of understanding on chromia scale growth in low...     

氟橡胶的红外光谱研究

采用红外(IR)光谱,包括一维红外光谱、二阶导数红外光谱、四阶导数红外光谱和去卷积红外光谱对氟橡胶(FKM)的分子结构进行了研究。试验发现:氟橡胶的红外吸收模式主要包括CH2不对称伸缩振动模式(νasCH2-FKM)、CH2对称伸缩振动模式(νsCH2-FKM)、CH2弯曲伸缩振动模式(δCH2-FKM)、CF2不对称伸缩振动模式(νasCF2-FKM)、CF2对称伸缩振动模式(νsCF2-FKM)和CFCl伸缩振动模式(νCFCl-FKM)等。研究发现:氟橡胶的去卷积IR光谱的谱图分辨能力要优于相应的一维IR光谱、二阶导数IR光谱和四阶导数IR光谱。此研究拓展了IR光谱在氟橡胶结构及应用研究的范围。     

Flexible and transparent capacitors based on gel-type natural polymers

In this work, we study the capacitive properties of gel-type natural abundant polymers without any dopants, mainly commercial gelatin and agar in deionized water. Here, we propose a facile fabrication of flexible, transparent, and planar electrolytic capacitors using these gel-type and indium tin oxide thin films as electrodes deposited on poly(ethylene terephthalate) substrates. Through cyclic voltammetry and galvanostatic charge–discharge techniques, we found that the devices show a specific capacitance in the order of the millifarads per gram, a specific power of ~10 mW cm⁻², which is sufficient to active low-power devices, and a life cycle with nearly 100% efficiency after 1,000 cycles. We found that we do not need to add dopants that improve the ionic conductivity of the natural polyelectrolytes to obtain capacitances within the millifarads per gram. The flexibility of the capacitors was demonstrated by bending them, after which they exhibited the same electrochemical performance as the unbent devices. The optical transparency of the capacitors was measured by UV–V is spectroscopy showing a high transmittance in the visible region.     

CO2 laser-assisted preparation of transparent Eu2Ti2O7 thin films

We present a laser-assisted preparation of transparent europium-titanate Eu₂Ti₂O₇ thin films with tailored structural and optical properties. We have evaluated the effects of the irradiation time on the structural and the optical properties of the films. This approach allows the preparation of nanocrystalline crack-free films and micro patterns. The amorphous thin films were prepared by a sol-gel method. The films were annealed by a CO₂ laser beam for various time intervals. The laser irradiation induced a crystallization process that resulted in the formation of Eu₂Ti₂O₇ nanocrystals. The nanocrystals regularly grew with increasing irradiation time reaching the size from 25?nm to 45?nm. A film of a thickness 480?nm exhibited an optical transmission of 91.9% that is close to the maximal theoretical limit. The film's refractive index at 632?nm was 2.26. A micrometric pattern was prepared by a direct laser writing followed by a wet chemical etching. Feasibility of the demonstrated approach, together with the high film's quality, and europium-titanate chemical resistivity open up many opportunities for advanced applications. The approach can be used for a preparation of protective coatings and integrated photonic devices such as planar optical waveguides and couplers.     

Ionic conductivities and high resolution microscopic evaluation of grain and grain boundaries of cerium-based codoped solid electrolytes

Doped CeGdO and codoped CeGdOSmO compositions were synthesized, giving rise to nanoparticulate powders. Ionic conductivities at bulk and grain boundaries of the sintered samples were determined, exhibiting increased conductivity in the samaria-codoped samples. Scanning electron microscopy (SEM) showed a significant reduction in the grain size of samaria-codoped electrolytes. This reduced grain size of the codoped samples caused a reduction in Schottky barrier height, increasing oxygen vacancy concentration in the space-charge layer of the grain boundary and culminating in greater ionic conductivity in the boundary region. For the gadolinium doped samples, high resolution transmission electron microscopy images at grains showed the presence of large cluster of defects (nanodomains), hindering the movement of charge carriers and reducing ionic conductivity. However, the samaria-codoped system displayed better homogeneity at atomic level, resulting in reduced oxygen vacancy ordering and, consequently, smaller nanodomains and higher bulk (grain) conductivity. The reduced grain sizes and smaller nanodomains caused by codoping favor the ionic conductivity of ceria-based ceramics, doped with gadolinia and codoped with samaria.     

In vitro cytotoxicity of monticellite based bioactive ceramic powder synthesized from boron derivative waste

The cytotoxicity of monticellite based bioactive ceramic powder, which was synthesized from boron derivative waste has been determined by in vitro assays of MTT, NRU, and JC-1 staining. The toxicity of powder on different mammalian cell lines (3T3-L1, HUVEC, CRL-2120) was evaluated at the concentrations of 10, 100, 200, 400 and 800?µg/mL to justify its potential for biomedical applications. The obtained results showed that monticellite based bioactive ceramic powder possesses not only bioactive feature but also biocompatible characteristic at the concentration range of 10–200?µg/mL. Hence, monticellite based bioactive ceramics have high potential as a bone graft substitute for bone void filling and coating applications.     

Recovery of polyphenols from camu-camu (Myrciaria dubia H.B.K. McVaugh) depulping residue by cloud point extraction

In this study the potential of cloud point extraction formed by a non-ionic surfactant was used in order to separate polyphenols from industrial residues of camu-camu. The effects of operational conditions of the cloud point extraction (CPE) on the polyphenol recovery and volumetric ratio were investigated. The results showed a maximum recovery of 95.71% that was obtained using 7.0 wt% Triton X-114, native pH (3.25), and 80 wt% polyphenol extract at 30 °C. The use of cloud point extraction was successful to recover the polyphenols from agroindustrial residue since it is a simple as well as of low-cost technique.